; model a PDP-11/44 with maximum memory, fpu, no CIS
set cpu 11/44 4096K fpp nocis

; disable all extra devices by default, will enable later
set ptr disabled
set ptp disabled
set lpt disabled
set rha disabled
set cr disabled
set rp disabled
set rk disabled
set xu disabled
set xq disabled
set rl disabled
set rx disabled
set ry disabled
set tm disabled
set ts disabled
set tq disabled
set hk disabled
set vh disabled

; use 7b ascii terminal
set tto 7b

; set the boot disk as an MSCP UDA50
set rq enabled
set rq0 rauser=1000
attach rq0 2.11BSD_rq.dsk

; set one DZ11 8 line async mux
; accessible via telnet to 127.0.0.1:4000...4007
set dz enabled
set dz lines=8
set dz 7b
set dz vector=310
attach -am dz 4000

; set one DELUA/DEUNA unibus enet controller
; ==> must setup ethX per your system config
set xu enabled
set xu type=deuna
attach xu eth0

; enable RX211 controller
set ry enabled
set ry0 double
set ry1 double
attach ry0 rx0.dsk
attach ry1 rx1.dsk

; enable 11/44 TU-58 port
set dli enabled
set dlo enabled
set dli lines=1
set dlo 8b
set dlo dataset
attach dli 4010

; enable one tape device on a TMSCP controller
set tq enabled

; show our config
show devices
show cpu iospace

; boot it
echo
echo Type this command to boot the disk:
echo
echo  boot rq0
echo